Instructions for flashed devices by semiautomatix Jul 20, 2018 0 Sonoff

To access your Tasmota device either:

  • Create a WiFi hotspot on your smart device with the SSID “smartkit” and password “password” (no quotes); find the device IP; enter the IP in the smart device browser; change your WiFi settings
  • Start Wifi smartconfig, with 3 short presses, allowing for SSID and Password configuration using an Android mobile phone with the ESP8266 SmartConfig app. The LED will blink during the config period. A single button press during this period will abort and restart sonoff.
  • Put the device in WiFi manager mode with 4 short presses – you should then see an SSID of Sonoff-xxxx; connect to Sonoff-xxxx; enter 192.168.4.1 in your browser; change your WiFi settings
  • Start Wifi Protected Setup (WPS), with 5 short presses, allowing for SSID and Password configuration using the router’s WPS button or webpage. The LED will blink during the config period. A single button press during this period will abort and restart sonoff.
Share with

POST YOUR COMMENTS


you may like
Using the Sonoff SV with a relay to open/close gate remotely by semiautomatix Aug 03, 2018 4

12V + and – (from the gate motor supply) to the sonoff + and – power input sonoff SV output (+ and -) to relay input relay output (NO contact) to gate motor trigger contacts The relay can easily be purchased at Communica, Mantech or similar for about R10 a piece This will require ..

READ MORE
Sonoff S26 WiFi Smart Plug – EU by semiautomatix Jul 04, 2018 2

Sonoff S26 is a WiFi smart plug with EU standard. Users can instantly convert any plug into a smart outlet with a convenient timer function that works on the user’s smartphone. With this smart socket, you can turn on and off any connected device – either via the eWeLink app or by ..

READ MORE