Instructions for flashed devices

Home Forums General Queries Sonoff Instructions for flashed devices

This topic contains 0 replies, has 1 voice, and was last updated by semiautomatix semiautomatix 1 year, 4 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #2047
    semiautomatix
    semiautomatix
    Keymaster

    To access your Tasmota device either:

    • Create a WiFi hotspot on your smart device with the SSID “smartkit” and password “password” (no quotes); find the device IP; enter the IP in the smart device browser; change your WiFi settings
    • Start Wifi smartconfig, with 3 short presses, allowing for SSID and Password configuration using an Android mobile phone with the ESP8266 SmartConfig app. The LED will blink during the config period. A single button press during this period will abort and restart sonoff.
    • Put the device in WiFi manager mode with 4 short presses – you should then see an SSID of Sonoff-xxxx; connect to Sonoff-xxxx; enter 192.168.4.1 in your browser; change your WiFi settings
    • Start Wifi Protected Setup (WPS), with 5 short presses, allowing for SSID and Password configuration using the router’s WPS button or webpage. The LED will blink during the config period. A single button press during this period will abort and restart sonoff.
Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.